Your Position: Home Page >> Tungsten Carbide Knowledge >> Cemented Carbide Cutting Tools >> Cemented Carbide Cutting Tools Technical Information
Cemented Carbide Tool Wear Characteristics and Composition
Cemented carbide tool wear includes abrasion wear, crater, chipping, thermal cracking, gap, abnormal debris, etc.
The mechanism of various cemented carbide tool wear occurred associated with the characteristics of the cemented carbide tool wear as shown in the table below.
| Wear Classification | Wear Form | Cemented Carbide Tool Wear Mechanism | Cemented Carbide Tool Wear Characteristics& Composition |
| Abrasion wear | Wear and tear | Shedding of smaller particles in relatively small when the frictional heat caused by tiny particles of the workpiece material in the hard particles or falling from the cemented carbide. | Hardness, compression strength, the content of Co, the particle size of the WC (carbide) |
| Thermal wear | Wear and tear | When used at high temperatures, or as the friction heat, the bonding strength of the alloy becomes lower, and promotes wear | Hardness, compression strength, thermal conductivity, the content of Co, the content of TiC and TaC |
| BUE | Wear,Crater, fragmentation | Under high pressure to friction, the partial adhesion of the workpiece material and tool, and when the higher strength than the bonding strength of the alloy, the occurrence of slight shedding, thereby generating abrasion and chipping | Hardness, compression strength, toughness, the content of Co |
| Bonding diffusion | Crater | Under high temperature, high pressure, the contact of the tool and the workpiece material, or a large amount of frictional heat is generated, since the adhesion and diffusion, alloy deteriorated accelerate wear | The content of TiC, TaC and Co, WC (carbide) particle size |
| Plastic deformation | Deformation, concave, the projection, the cutting edge is crooked, notched, wear | Due to high temperature so that the strength becomes low, or by the force above the elastic limit, so that the deformation of the adhesive layer, and then generate the notch, cracking etc. | Hardness, compression strength, elastic limit, toughness, Co content |
| Notch cracks | Cracking, collapsing, chipping | Internal deformation, mechanical shock, the plastically deformed, due to repeated fatigue stress changes, or exceeds the critical strength, partially collapse or cracking occurred, severe become damaged | Toughness, tensile strength, characteristics withstand impact force, the content of Co, the particle size of the WC (carbide) |
| Thermal cracking | Cracking, collapse | Cracking even destruction occurs due to thermal shock or local heating, | Toughness, thermal expansion coefficient, thermal conductivity, the content of TiC, TaC and Co |
Chinatungsten Online can provide various sizes and grades of cemented carbide cutting tools, non-standard products are also customized according to customer requirements. Welcome to consult and purchase sales@chinatungsten.com, sales@xiamentungsten.com .
sales@chinatungsten.com
閩公網安備 35020602000140號