PDF Format:

1.Comples high-temperature sintering equipment By Ingo Cremer,Dipl-Ing

Abstract:The following article is intended as an introduction to high-temperature sintering,describing which process steps can be combined,how the individual sections operate and which problems have to be accounted for.
Key words:high temperature Sintering,Walking beam.Rapid cooling,Atmosphere control;MIM
復合高溫燒結設備（萊克默熱處理設備有限公司，Auf dem Flabig,D-52355，Dueren）
摘要：介紹了高溫燒結設備的開發，描述了哪些工藝步驟可以被結合起來，各個獨立的部分之間如何工作以及需要考慮的問題。
關鍵詞：高溫燒結；步進梁；快速冷卻；氣氛控制；MIM

2.how metals fail

3.The Designer’s Guide to Tungsten Carbide

4.Tungsten Heavy Alloy Design Manual

5.Thermodynamic Investigation on the Liquid Sintering of the Refractory Mo Alloys

Abstract:Using CALPHAD method,the phase diagrams of the Cu-Ni,Cu-Mo and Mo-Ni binary systems were calculated by employing the thermodynamic database in literature.Through extrapolation from the relative binary systems,the isothermal section of Mo-Ni-Cu ternary system at 1273K was calculated.It is found that there is a narrow liquid phase area at the Mo-rich side,which demonstrates the possibility of liquid phase sintering at 1273K with some amount of addition of Cu and Ni.Furthermore,necessary experiment was carried out to cinfirm the calculation results.
Key words:CALPHAD technology,thermodynamic,extrapolation,liquid phase sintering,Mo-Ni-Cu ternary system

鉬合金耐火材料液相燒結性能熱力學研究
摘要：利用文獻已有的體系熱力學數據，采用計算材料科學的方法計算了Cu-Ni、Cu-Mo、Ni-Mo3個二元體系相圖，并熱力學外退了Mo-Ni-Cu三元體系1273K等溫截面圖，發現在富Mo角存在一個狹小的液相區，表明在1273K的溫度小已通過添加適量的銅鎳固溶液可改善Mo合金的液相燒結性能，并實驗驗證了計算結果。
關鍵詞：CALPHAD計算、熱力學外推、液相燒結、Mo-Ni-Cu三元體系

6.Application and Latest Development of W-Cu Composite Materials

Abstract:Description is made of the W-Cu Composite Materials in respect of its performance such as good thermal and electric conductivity and high-temperature oxidization-resistance,its wide application in the high-tech fields of electron sealing,inergrated circuit,national defense military,aerospace.In the paper is introduced the main applications and latest development of new technology of the W-Cu Materials both at home and abroad.
Key words:W-Cu Composite Materials,production technology,application and development

鎢銅復合材料的應用與研究現狀
摘要：在簡述鎢銅復合材料具有良好導熱、導電性和高溫抗氧化性能等優良性能及其在電子封裝、集成電路、國防軍工、航空航天等高尖端技術的應用拓展空間的基礎上，介紹了國內外鎢銅材料的主要應用領域和制備新工藝的研究發展現狀。
關鍵詞：鎢銅復合材料、制備技術、應用與研究

Go to Page[1]  [2]  [3]  [4]  [5]  

 Return to [ Information Bank ]